Have you ever taken a video of your Rivian and noticed the floating aura of the race track shaped headlight? Well that was the inspiration for this design. We thought it would be fun to add a little color to that already distinct front of the vehicle. With our headlight halos you can compliment the fun nature of the R1T or R1S with either a touch of Blue, Yellow or Red/Pink.

Easy to apply design covers most of the visible light of the capsule shaped part of the daytime running lights (DRLs) but because we use headlight tint film it allows most of the light through but in one of 3 fun colors. It does not interfere with the orange turn or hazard signals and actually makes the car more noticeable to oncoming traffic. If you ever decide to remove the color it is as simple as peeling it off but it is designed to withstand weather and washing, the film manufacturer claims a 4 to 6 year life span for said film.

Installation only takes a few minutes. Clean off the headlight and surrounding surfaces with rubbing/isopropyl alcohol and a soft microfiber towel. Choose the right graphic for the right side. Each halo will have an arrow included showing the up direction in the arrowhead you will find either a D for driver side or P for passenger side. Peel off the design with the transfer paper off the backing paper. Be sure all elements lift with the transfer paper. Use the hood corner triangles as a rough guide where to start. Then walk the graphic in by aligning, adjusting and peeling, don't apply any pressure to the surface, just work the corners. The goal is to cover the racetrack shape and about 1/8" to the inside diameter. Once you are happy with the alignment, work out the wrinkles by lifting and flattening with the transfer tape still attached, be sure not to crease the vinyl. Remove the transfer paper and any guide elements and apply heat to promote adhesion and flatten any non creased wrinkles.